News
News
Process description for stamping, sheet metal and fabrication-separation
Shear cutting of plates Shear is the cutting of sheet metal into strips, blocks or blanks of a certain shape for other stamping processes. Therefore, shearing generally belongs to the blanking process. Main equipment: shearing machine, laser, water, plasma cutting machine. Shearing and cutting of pipes and profiles There are mainly punching, double punching, mandrel shear, mandrel double shear, rotating roller shear, but also laser, water, plasma cutting. The main methods of profile shearing: punching and cutting.
01
2023
/
05
Process description for stamping, sheet metal and fabrication-deep drawing
Deep drawing is also called drawing, which is a stamping processing method that uses a die to turn the blanking blank into an open hollow part.
07
2023
/
04
Process description for stamping, sheet metal and fabrication-bending
The stamping process of bending flat blanks, profiles, pipes and wires into a certain curvature and a certain angle to form a certain shape part is called bending.
03
2023
/
04
Process Description for Stamping, Sheet Metal and Fabrication-Blanking
Blanking is a basic process of separating sheet metal with the aid of a die.
01
2023
/
03
Disclosure of environmental information
Emission permit EIA information test report
21
2022
/
02
Epidemic prevention and control propaganda slogan
Slogan of epidemic prevention and control.
26
2020
/
03